Beschreibung
Equipment As Follows:
METSO HP350e CONE CRUSHER
We are pleased to introduce the Nordberg HP350e, the latest generation of the highly successful HP300. Through enhanced kinematics, crushing force, clamping force and 350 horsepower, the new HP350e provides significant gains in production capacity and improved particle shape over traditional cone crushers.
New features include an anti- spin brake mechanism and no epoxy backing material required for the bowl liner and mantle.
The HP350e is suitable for both secondary and tertiary crushing for portable and stationary installations. Equipped with manganese steel crushing members, bronze bearings and replaceable main frame seat liners. Features include hydraulic bowl clamping and adjustment, automatic tramp iron release and hydraulic clearing of the crusher chamber. Remote control station mounted to side of plant allows convenient operation for adjusting the closed side setting, or for clearing the crusher.
Additional HP cone features include a package lubrication system consisting of an internal independent pump, oil pressure switch, temperature switch, oil tank with strainer, oil level gauge, thermometers at three locations, (2) oil heater with control panel, oil filter and oil cooler (air-radiator type), and crusher tools.
Main Information
Industrial- Construction
Lubrication Unit- Standard
Crusher kinematics-Enhanced kinematics
Anti-spin device- Included
Hydraulic motor location- Right to countershaft
Cavity type-TBD
Countershaft Speed-TBD
Site Specifications
Accumulator certification-Standard
Minimum ambient temperature-Normal cond. down to 15°C/5°F
Maximum ambient temperature-Normal cond. up to 40°C/103°F
Frequency-60 HZ
Lubrication unit voltage-265/460V
Norm-UL
Power Transmission
Drive-Single drive
Motor position-Standard btw 8 and 4 o'clock
Grooves type-8V
Crusher pulley-Included
Crusher pulley size-630 MM
Lub Unit
Control type-Digital
Cooler location-On frame
Quantity of cooler motors-1 EA
Cooling medium-Air
Tools and options
Accumulator charging kit-Included
Tool to check the pressure inside the accumulator and to connect the inflator head to the reducing valve
METSO 6x20 TWO DECK HORIZONTAL SCREEN
The new triple shaft Metso horizontal screen is designed for maximum efficiency and performance
Coil Springs and dampers
5/16” Thick Side Plates with Huck Bolt Construction
Side Tension decks with seal strips for 4’ screen panels
Heavy Duty Tube Steel Decks with Herringbone Cross Bracing
Vibrating Mechanism (160mm bearings) with Oil lubrication
Carriage Bolts used to retain clamp bars – Standard is 4’ long bars / 5 ft available upon request
AR lined Feedbox
AR lined Discharge Lips
Right hand drive standard with motor mount and belt guard and tensioning device
Hand access on triple deck screens. Spray Bar knockouts, bottom deck Feed end curtain
Medium Scalper Deck – includes heavy duty side tension top deck, heavier feedbox liner and heavier top discharge lip. Also includes side extension wear liners along the screens sides and feedbox perimeter.
Side tension single crown
End tension
Installation Angle 0°
Elliptical stroke 5/8” -3/4”
RPM 675-875
Separating G Force: 4.8-6.5
Top deck options
Middle deck options
Bottom deck options
GREYHAWK PORTABLE HP350e CC CHASSIS
MAIN CHASSIS
Heavy duty main beam
Quad-axle Hutch spring ride suspension with three axles spaced at 49.5” and one axle spaced at 96”
Qty (16) 11R22.5 tires
Air controlled brakes on all four axles
LED side marker and tail lights
Horizontal screen support frame with diamond plate catwalks and handrails
Crusher motor support with hydraulic adjust for belt tensioning
Adjustable king pin support
Adjustable tubular supports reduce the amount of blocking required in the kingpin area during plant operation, which simplifies set up and tear down.
The kingpin supports have Acme threaded rod adjustment and fold up for transport.
Crusher feed basket
Grease lines
FEED CONVEYOR-42”
Channel frame
Superior 5” CEMA C channel mount idlers
Superior 5” CEMA C channel mount impact idlers in high impact areas
Superior 5” CEMA C rubber cushion return idlers
Four-foot impact bed with Argonics impact bars
12” wide slot take-ups
3 ply, 3/16” top cover conveyor belting
Superior Powerfold allows easy access for crusher maintenance
Head Pulley
VanDer Graf motorized drum pulley
16” diameter
20HP
Tail Pulley
Superior 12”x44” wing pulley
XT40 hubs
Dodge SCM bearings
60” wide receiving hopper lined with bolted in 1” Trellex rubber
½” skirtboard rubber where required
Lift points for removal of conveyor
OVER SCREEN CONVEYOR-48”
Channel frame
Superior 5” CEMA C channel mount idlers
Superior 5” CEMA C channel mount impact idlers in high impact areas
Superior 5” CEMA C rubber cushion return idlers
12” tube in tube take-ups
3 ply, 3/16” top cover conveyor belting
Head Pulley
VanDer Graf motorized pulley
12” diameter
10HP
Tail Pulley
Superior 12”x51” wing pulley
XT40 hubs
Dodge SCM bearings
Supported by four telescoping tubes with hydraulic cylinders to adjust between travel, operation and maintenance positions
½” skirtboard rubber where required
UNDER CRUSHER CONVEYOR-36”
Channel frame
Superior 5” CEMA C channel mount idlers
Superior 5” CEMA C rubber cushion return idlers
Superior Exterra belt scraper
12” wide slot take-ups
3 ply, 3/16” top cover conveyor belting
Head Pulley
Superior 10”x38” vulcanized drum pulley
XT30 hubs
Dodge SCM pillow block bearings
Master PT shaft mount reducer
WEG 15HP motor
Sheaves & vbelts
Tail Pulley
Superior 10”x38” wing pulley
XT30 hubs
Dodge SCM bearings
½” skirtboard rubber where required
RE-CIRCULATING CONVEYOR-36”
Channel frame
Superior 5” CEMA C channel mount idlers
Superior 5” CEMA C rubber cushion return idlers
12” tube in tube take-ups
2 ply, 3/16” top cover conveyor belting
Head Pulley
VanDer Graff motorized drum pulley
5” diameter
5HP
Tail Pulley
Superior 10”x38” wing pulley
XT30 hubs
Dodge SCM bearings
½” skirtboard rubber where required
UNDER SCREEN CONVEYOR-60”
Channel frame
Superior 5” CEMA C channel mount picking idlers
Superior 5” CEMA C rubber cushion return idlers
Superior Exterra belt scraper
12” wide slot take-ups
3 ply, 3/16” top cover conveyor belting
Head Pulley
Superior 12”x63” vulcanized drum pulley
XT40 hubs
Dodge SCM pillow block bearings
Master PT shaft mount reducer
WEG 15HP motor
Sheaves and vbelts
Tail Pulley
Superior 12”x63” wing pulley
XT40 hubs
Dodge SCM bearings
½” skirtboard rubber where required
TOP CROSS CONVEYOR-18”
Channel frame
Superior 5” CEMA C channel mount idlers
Superior 5” CEMA C rubber cushion return idlers
12” tube in tube take-ups
2 ply, 3/16” top cover conveyor belting
Head Pulley
Van Der Graff motorized pulley
5”-5.5HP
Tail Pulley
Superior 8”x20” wing pulley
XT25 hubs
1-15/16” dodge SCM bearings
½” skirtboard rubber where required
BOTTOM CROSS CONVEYOR-24”
Channel frame
Superior 5” CEMA C channel mount idlers
Superior 5” CEMA C rubber cushion return idlers
12” tube in tube take-ups
2 ply, 3/16” top cover conveyor belting
Head Pulley
Van Der Graff motorized pulley
5”-5.5HP
Tail Pulley
Superior 8”x26” wing pulley
XT25 hubs
1-15/16” dodge SCM bearings
½” skirtboard rubber where required
ELECTRICAL
NEMA4 enclosure
Enclosure is bolted to a steel support frame for setting on grade during operation
Lifting eyes
Connected to plant with 15’ of cable to allow the customer to position the enclosure
Door interlocked disconnect linkage
Warning horn
Square D circuit breakers
Square D NEMA rated starters
Feed Conveyor – 20HP (IEC)
Over Screen Conveyor – 10HP (IEC)
Under Crusher Conveyor – 15HP (IEC)
Re-Circulating Conveyor – 5.5HP (IEC)
Under Screen Conveyor – 15HP (IEC)
Top Cross Conveyor – 5.5HP (IEC)
Bottom Cross Conveyor – 5.5HP (IEC)
Crusher lube pump – 10HP (IEC)
Crusher lube oil cooler – 7.5HP (IEC)
Crusher hydraulic pump – 10HP (IEC)
Screen – 40HP (NEMA)
Crusher motor – 350HP/1800RPM, WEG SSW900 soft start
Door mounted amp meter for crusher amperage
Hour meter
Pushbutton start/stop control
Plant fully wired and test run
HYDRAULICS
13HP Honda gasoline engine with electric start and backup recoil start
(6) Hydraulic jacklegs with lock-out valves
The hydraulic jack assemblies are designed for service as a “Run-on” jack, however, we highly recommend the use of cribbing to properly support the portable chassis
Six bank valve body for independent control of each jackleg
Single bank valve body for crusher motor adjustment
Single bank valve body for folding the feed conveyor head section
Two bank valve body for adjusting the over screen conveyor front and rear supports
SAFETY/GUARDING
We install all standard guarding, customer will be responsible for compliance with local codes.
GENERAL:
Paint
(2) sets of owners/parts manuals
Chassis Color-GH Beige
Handrail/Guarding Color-GH Orange
Decals-Orange & grey stripingSpezifikation
HerstellerGREY HAWK
ModellHP350ECC
Seriennummer1336/0121/24039
ZustandNeu
Bestandsnummer1652
HerstellerGREY HAWK|
ModellHP350ECC|
Seriennummer1336/0121/24039|
ZustandNeu|
Bestandsnummer1652|
