CHF 252’644
Maschinen-Standort:11503 Wonderland RdSt Thomas, Ontario, Kanada N5P 3T1
Verkäuferinformation
Verkäufer-Informationen anzeigenMARCEL EQUIPMENT LIMITED
Kontakt:Mark Frederick
Telefon:+1 647-945-6452
St Thomas, Ontario, Kanada N5P 3T1
Allgemein
Jahr
2019
Hersteller
CATERPILLAR
Modell
730
Stunden
5’035
Seriennummer
3T300708
Zustand
Gebraucht
Bestandsnummer
T7098
Beschreibung
This CAT 730 features 750/65R25 Floatation Tires, 31 Ton Capacity / 23 CYD, Automatic Traction Control, Rear View Camera, Enclosed Wet Brakes and Secondary Steering. Tailgate is Available.
2,000-hour CAT Powertrain Warranty
Caterpillar 730 ADT featuring:
• 2,000-hour CAT Powertrain Warranty
• CAT C13 ACERT Engine
• Powershift/Autoshift Transmission
• Secondary Steering
• Cab (ROPS) w/ A/C
• Enclosed Wet Brakes
• 750/65R 25 Flotation Tires
• 31 Ton Capacity/23 CYD
• Advanced Automatic Traction Control
• Automatic Retarder Control
• Assisted Dumping System
• Hill Assist
• Tailgate is Available
• Rear View Camera
• Rated at 375 HP
• Weight 53,000 LBS
When this 730 Articulated Truck arrived in yard, MEL had local CAT dealer complete the following:
• Strip machine for power washing
• Complete CAT TA1 Plus inspection
• Complete all Pressure & Performance checks to ensure within OEM spec
• Update ECM flash files
• Cut open all filters & inspect for contaminates - all clean
• Service emissions system
• Inspect magnetic plugs/screens & suction screens - all clean
• Replaced all machine component breathers
• Service machine as required
• Check oil levels
• Inspect oils for discoloration- all good
• Check for logged & active codes & repair
• Check for applicable service letters
Based on inspection, CAT mechanic completed the following repairs:
• Changed engine, transmission & drop box oils
• NEW engine air filters & cab air filters
• All NEW breathers
• Installed NEW rad cap
• Installed NEW serpentine belt & idler bearings
• Serviced & cleaned battery connections
• Installed NEW hydraulic level site glass
• Drained bottom of fuel tank of any sediment
• Performed 5000 hour service on emissions system
• Installed NEW DEF injector
• Installed NEW DEF filter
• Installed NEW ARD spark plug
• Installed CLEANED DPF filter
• Installed NEW UPDATED DEF manifold
• Installed NEW UPDATED walking beam assemblies
• Installed NEW rear suspension blocks
• Installed NEW washer fluid nozzles
• Installed NEW wiper blades
• Installed NEW cab door latch & shock
Marcel Equipment completed the following repairs:
• Installed NEW box pins bushings
• Installed NEW lower hitch A-frame bearing
• Installed NEW pins & bearings in rod end box lift cylinders
• Installed NEW mudflaps
• Installed seat suspension kit
• Ensured all grease points working with autogreaser
• Completed required box welding/cosmetic repairs
• Detailed cab
The following are repairs completed by CAT Dealer prior to Marcel Equipment owning the machine:
At 5,010 hours, installed NEW pin, bearing & retainer plate in rear A frame
At 4,436 hours, installed NEW output shaft yoke seal
At 4,399 hours, performed 2000 hour service
At 3,950 hours, installed NEW front suspension mounts
At 3,936 hours, performed 1500 hour service
At 3,808 hours, installed NEW front u-joint
At 3,399 hours, performed 1000 hour service
At 3,399 hours, installed NEW auto greaser pump
At 2,453 hours, performed 2000 hour service
At 1,435 hours, performed 1500 hour service
At 955 hours, performed 1000 hour service
At 478 hours, performed 500 hour service
This CAT 730 Truck is now ready for work.