Preis auf Anfrage
Maschinen-Standort:4894 NW US HWY 41Lake City, Florida, USA 32055
Verkäuferinformation
Verkäufer-Informationen anzeigenQuality Equipment and Parts
Kontakt:QEP Sales Staff
Telefon:(386) 603-7032
Lake City, Florida, USA 32055
Allgemein
Jahr
2026
Hersteller
BANDIT
Stunden
1
Modell
HM6420
Zustand
Neu
Beschreibung
2025 Bandit Horizontal feed with a 50" diameter x 66" wide
hammermill (mill is equipped with 20 hammer tips)
- 40" high x 64" wide mill opening.
(4) 1.5" thick individually replaceable anvil
sections
500 gallon fuel tank with magnetic drain plug and
an electronic float style gauge that displays
fuel level on the control panel display.
120 gallon hydraulic tank with magnetic drain
plug, aluminum fluid sight gauge, and shutoff
valves.
15' 6" long x 64" wide steel slat infeed conveyor
chain, direct driven by a hydraulic
motor/planetary gear box combo
(1) 38.5" diameter 64.75" wide floating feed
wheel internally driven by a hydraulic
motor/gearbox combination. Also features 1-3/4"
teeth located around the diameter of the feed
wheel.
Proportional Feed System (Regulates feed system
with preset speeds - reverses feed system once
engine goes below a set RPM, then re-starts feed
system once engine re-gains full RPM).
Impact detection system - designed to limit
damage if a contaminant is struck inside the
grinding chamber. Once an impact is made, the
grinder will idle down, disengage the clutch, and
reverse the feed
26' 4" long x 56" wide folding discharge conveyor
(3-speed) - stacking height = 16' 7"
Radio remote control with tether remote back-up
and 50' of cord (Controls yoke up, infeed
conveyor forward / reverse, feed wheel forward /
reverse, infeed and discharge speeds, track
forward / reverse, track speed hi / low, engine
throttle, fan purge and engine e-stop). Remote
also includes LCD screen which displays Engine
Coolant Temp, Engine Oil Pressure, Engine Load %,
Engine RPM and Battery Voltage.
(4) engine shut down switches located on all four
corners of machine.
10 pound ABC Type Fire extinguisher with mount.
Caterpillar Model 325EL steel track undercarriage
with HD drive, (700 MM, 27 1/2" wide track pads),
triple grouser - (Includes 4 year track warranty
for assembled components)
Air compressor with gas engine along with hose
reel and 50' hose. Also includes (1) M7 impact
wrench with applicable sockets for changing
hardware
(TREE CARE)
Antrieb
Leistung
894.84 kW