CID 78" EXTREME ROOT GRAPPLE

Wurzel

CID

78" EXTREME ROOT GRAPPLE

Neu

CIDXRG78

The Prowler X-treme Root Grapple is an absolute necessity on many job sites and in many environments. It is ideal for moving logs, brush, rocks or just about any type of debris. Open bottom framing allows the grapple to handle large trees, stumps, building material, rocks and more, while the small debris falls to the ground. Root Grapples are very versatile as the frontal tines allow the attachment to pull roots, small stumps, and rocks during land clearing. In demolition and storm clean up these same tines help to force the bucket in to jammed debris and act as a wedge to force its way into the piles and grab a larger amount of material per scoop. Each of our hydraulic cylinders operate independently to adjust for uneven loads. All of our root grapples are built with 1/2" top quality steel with greaseable pins and bushings at all hinge points. Every unit exceeds the lifting capacity of the skid steer machine it is used on. Enclosed hydraulic cylinder shaft design. Built from 1/2" thick steel plate on the top and bottom, with 4" square reinforcement tubing. Longer tines for bigger loads. Hydraulic lines routed inside the tubing to prevent tears. Tough Enough to handle larger higher horsepower Skid Steer and Track Loaders Hydraulic cylinders have a 2 inch bore and a 10 inch stroke. 100 % American Made!!! FREE SHIPPING TO 48 STATES! (Additional shipping charges to Alaska and Hawaii) Discount available for local pick-up!